Raritan C.H. unblocks clogged toilet hoses
by Raritan 5 Nov 2021 17:06 PDT
Seawater plumbing systems must be maintained to prevent clogging. Many users don't realize how quickly calcium carbonate builds up in the hoses and connections when flushing with seawater. Plus, whether using fresh or saltwater, uric scale adds to the problem. The result is a restricted flow and eventual clog. The remedy is to remove and clean the piping—a nasty prospect—or regular use of C.H. Cleans Hoses from Raritan Engineering. The powerful formula dissolves buildup in the lines and holding tank, and is ideal for Raritan Electroscan, Lectra/San and other Type I flow-through treatment systems.
Few products are as easy to use as C.H. Cleans Hoses. After identifying the length and width of the hose to determine the amount needed, one part formula to five parts clean water is simply poured into the toilet and allowed to sit in the line and tank for at least six hours. Once thoroughly flushed with at least 38l of water, the holding tank is pumped out. For extreme buildup in a tank, 12-18 hours of utility pump or compressed air agitation may be necessary.
When using C.H. Cleans Hoses with Electroscan or Lectra/San, a minimum of 11l of the solution is poured into the system. This is allowed to sit for six to 24 hours before activating the treatment device. Once flushed with 38l of clean water, the system is ready for use.
Raritan C.H. Cleans Hoses is a concentrated blend of liquid chemicals. A 3.7l container makes 22.7l of solution; a 1l bottle makes 5.6l.
For more information contact Raritan, Tel: 856-825-4900; Fax: 856-825-4409. ; www.raritaneng.com.