Please select your home edition
PBW newsletters (top)

The Longbow Jet Hydroplane project benefits from Wessex Resins & Adhesives

by Jake Kavanagh 14 Feb 2019 06:00 PST
No shortage of clamps, although the team did admit that they had accidentally stuck one or two to the boat itself rather than to the plastic protectors © Wessex Resins & Adhesives

A team of British enthusiasts is building a jet-powered boat to beat the current water speed record of 317mph. WEST SYSTEM® Epoxy will be holding it all together.

Tucked away in a home workshop on the Fylde Coast, Lancashire, a remarkable hydroplane is taking shape. Powered by twin Rolls Royce Viper 535 pure thrust jet engines from the British Strikemaster aircraft, it will have a combined static thrust of 6800 lbs. This is double that of the current record holder, Spirit of Australia, in which Ken Warby set the record as the fastest boat in the world. The target the British team has to beat is an average speed of 317mph, but they think they have the design that will bring the record home.

Measuring nine metres (29.5ft) long, the new boat is named Longbow and will be made entirely of epoxy-impregnated wood. The epoxy being used is WEST SYSTEM 105 Epoxy Resin with 205 Fast Hardener, initially provided in a 30kg C pack. Both David Johnson and Hamish Cook of West System International have been assisting the project with sponsored product and technical advice.

They will be adding to a big reservoir of skill sets. This group of enthusiasts assisted with the recovery and restoration of Donald Campbell's iconic jet hydroplane Bluebird K7 that achieved seven Outright World Water Speed Records. The same group also went on to assist with the construction of a full-size replica of the craft complete with matching (and working) jet engine, so they are very familiar with jet hydroplanes.

Why wood?

With so many advances in composite materials, why is this project being built in wood?

Project co-ordinator David Aldred, a professional surveyor of wooden buildings, told Epoxycraft that it is probably the best material for the job.

"We could of course use materials like carbon fibre composite or, as in the case of Bluebird K7, all metal," he says. "However, supporting the case for wood is that the two previous holders of the record have both been made this way, including the penultimate holder, Hustler, which achieved 285mph. These boats won't have to cope with mountainous seas or wash from other competitors. Instead, they are travelling across smooth water which they are barely kissing as they plane over the surface."

David also points out that to make a carbon hull, they would first need a mould and to make a mould, they would need a 'plug', which will be a wooden version of the finished boat. So why not bypass the carbon stage completely?

"The hull and riding surfaces are all formed as one continuous piece," he says. "This means it is very difficult (and expensive) to make significant changes to a moulded carbon hull if proving trials made this necessary. By comparison, a timber hull is very easy to modify and be made equally strong again afterwards. Another consideration is the effects from any damage and water absorption during use. In composite hulls this is not very easy to detect. Also, hardware is difficult to retrofit should changes be required. On timber hulls, this is much easier."

Metal hulls also have their drawbacks. "They tend to be inherently heavy," David explains. "As in the case of Bluebird K7, they typically require high angles of attack to get all that weight onto their planing shoes. Aerodynamically, these high angles at the front become increasingly undesirable the faster the boat travels and we obviously want to reduce the risk of the craft lifting off and blowing over. Also, metal hulls can be susceptible to problems with heat-affected zones from welding, surface corrosion both inside and out and stress failures around rivets."

The timber being used is marine grade plywood and spruce, supplied by Bristol-based Robbins Timber. This long-served company is an approved WEST SYSTEM distributor so is well acquainted with the best materials for use with epoxy. Robbins is also a major sponsor of the project so is providing the team with all of their timber needs as the build progresses.

"As a surveyor specialising in wood I know that it is nature's own composite material, with certain species having terrific strength to weight ratio," David says. "This fact was ably demonstrated by one of the fastest and most loved aircraft of the Second World War, the Mosquito. With a recorded speed of 428mph, the airframe was constructed from plywood, balsa and spruce. In our case the marriage of engineered wood with formulated resins yields a hull that is lighter, stronger and more durable than a traditionally-built boat. Cold-moulded construction requires the least in highly technical and expensive construction. This allows our limited finances to be better spent on other aspects of the build."

By way of a closing comment, David remarks: "Just remember the strongest case of all for us choosing a timber hull was Noah's Ark, built in wood by amateurs. The Titanic, on the other hand,was built in metal by engineers!"

Epoxycraft will be bringing you regular updates focussed on the use of resins in the project and in the meantime you can follow the progress of the rest of the build, including harnessing those two jet engines at:

See more stories and tips at

Related Articles

Chandleries currently open stocking epoxy resin
Places to buy West System products during June 2020 in the UK We're all eagerly anticipating the reopening of retail outlets. In the meantime, if you're looking to stock up on your favourite epoxy brands, here are some WEST SYSTEM®, PRO-SET® and Entropy Resins® epoxy stockists who we know are currently open. Posted on 5 Jun
WEST SYSTEM® epoxy set to go sub-orbital
NOVA 2 rocket within ten months of its first launch A NOVA 2 rocket being developed by Starchaser is within ten months of its first launch. This one-seater rocket is a significant step towards future plans which include a rocket capable of taking two passengers with the pilot. Posted on 1 Jun
West System used to create bullet coat racks
New lockdown project using epoxy resin Dee (David) Caldwell has spent his lockdown creating bullet coat racks. Using locally sourced WW2 bullets he's collected at Medmerry, West Sussex, and wood from a cedar planted by Capability Brown, he's started a new business in his garden workshop. Posted on 13 May
Electric boat's sustainable construction
Bio-based infused epoxy resin, recycled PET, and basalt/flax fibres RS Electric Boats, the sister company to RS Sailing, unveiled its electric RIB earlier this year, a boat that's said to be the highest level of sustainable construction of any boat in its sector. Posted on 2 May
WEST SYSTEM 105-K Glass Fibre Boat Repair Kit
The upgraded kit comprises everything needed to fix minor cracks, holes and punctures Wessex Resins is delighted to announce it has improved and updated the WEST SYSTEM® 105-K Glass Fibre Boat Repair Kit. The kit comprises everything needed to fix minor cracks, holes and punctures as well as refit and replace hardware on a boat. Posted on 16 Apr
Wessex Resins & Adhesives joins 1% for the Planet
Donating to Protect Our Winters UK Wessex Resins and Adhesives is delighted to announce it has donated 1 per cent of its annual turnover for the ENTROPY RESINS® product range to Protect Our Winters UK. Posted on 9 Apr
Building a wooden dinghy with epoxy resin part 2
Strip planking the hull, and making an amazing wooden mast "You don't build your own boat to save money," Steve explains. "You do it for the sheer satisfaction of the craftsmanship involved. For what I paid in raw materials I could have bought several second-hand boats, but where is the fun in that?" Posted on 18 Mar
Epoxy Resin basics
Cure stages, controlling cure time, dispensing, fillers, recoating and more Tips for working with epoxy include: What is the difference between working time, pot life and cure time? Each hardener has an ideal temperature range. Primarily cotton flock, 403 is great for quickly thickening the epoxy. Posted on 11 Mar
The stuff AC75s are made of
INEOS TEAM UK's manufacturing team uses Super Toughened Epoxy In the high speed, high stress world of the America's Cup, keeping the beast in one piece is clearly a big challenge. Structural attachments that require an adhesive bond need a strong yet toughened epoxy adhesive to transmit loads between components. Posted on 9 Mar
Wessex Resins offers free repair demonstrations
'How to use epoxy' demos at the RYA Dinghy Show 2020 Wessex Resins and Adhesives is offering free repair demonstrations on its stand C2 (Hall Three) at the RYA Dinghy Show, Alexandra Palace, 29th February to 1st March. Posted on 19 Feb
MBW newsletters (top)