Print Page | Close Window

Daggerboard and Rudder Blade

Printed From: Yachts and Yachting Online
Category: General
Forum Name: Repair & maintenance
Forum Discription: Questions & tips on the subject
URL: http://www.yachtsandyachting.com/forum/forum_posts.asp?TID=1872
Printed Date: 23 May 22 at 8:27pm
Software Version: Web Wiz Forums 9.665y - http://www.webwizforums.com


Topic: Daggerboard and Rudder Blade
Posted By: phantom871
Subject: Daggerboard and Rudder Blade
Date Posted: 13 Jun 06 at 11:03am

Hi all my search continues

Is there anybody out there you would recommend for to build me a rudder and dagger board for my international canoe!

 

 



-------------
If its bent pull harder



Replies:
Posted By: Isis
Date Posted: 13 Jun 06 at 11:12am
Andy P at http://www.bloodaxeboats.co.uk/ - Bloodaxe

Mike C at http://www.aardvarkracing.co.uk/ - Aardvark


-------------


Posted By: DaveT
Date Posted: 13 Jun 06 at 6:20pm
Or Alan Powell at Quicksilver foils who is an experienced IC sailor and all round helpful chap, his details are on the http://www.intcanoe.org.uk - www.intcanoe.org.uk website I think, if pm me for his number.


Posted By: neilw
Date Posted: 13 Jun 06 at 7:36pm

details of all the IC builders can be found at http://www.intcanoe.org.uk/introduction2.html - http://www.intcanoe.org.uk/introduction2.html

 

 



-------------



Print Page | Close Window

Bulletin Board Software by Web Wiz Forums® version 9.665y - http://www.webwizforums.com
Copyright ©2001-2010 Web Wiz - http://www.webwizguide.com